Polycell Finishing Skim Polyfilla is the easy way to give a beautiful smooth finish to slightly rough or uneven plaster. Ready mixed for ease of use, it will skim up to 3mm thick and adheres strongly to plaster. Simply brush it on and smooth off.
Gives a smooth finish to slightly rough or uneven plaster.
Simply brush it on and smooth off.
Skims up to 3mm thick with strong adhesion.
ToolsDamp cloth, brush and filling blade.
Difficulty levelthree stars
Pack size1L and 2.5L tubs
Drying timeSurface dry in 3 - 4 hours (depending on conditions)
Ensure surface and crack are dry and free from loose material.
1
Touch in nails and screw heads with oil based paint.
2
Stir to a creamy consistency.
3
Spread on with a paint brush using upward strokes.
4
Smooth over using the free spreader moving in an upward curve.
5
Maintain a firm, even pressure. Don't worry about small irregularities or 'tramlines'.
6
Allow to dry for 2 to 3 hours until the surface appears matt.
7
Now use the spreader to achieve a flat, smooth finish, rewetting the surface if necessary.
8
After 3 to 4 hours you can re-wet the surface and rub gently with a damp cloth and use the spreader to remove and finish irregularities for a super-smooth finish.
9
Allow to dry for 24 hours. Prime before painting, size before papering.
You can find Polycell products in many supermarkets, major DIY stores and smaller independent stores throughout the UK. The range they stock may vary, so it's a good idea to check product availability with them in advance to avoid disappointment.