How to fill a gap between your wall and coving or skirting
Print
Step by step
- Difficulty leveltwo stars difficultylevel
- Ensure surface and crack are dry and free from loose material
- 1
-
- Remove the tip of the cartridge carefully with a sharp knife, and screw nozzle on.
- 2
-
- Remove cap and carefully cut top from nozzle with a sharp knife to the size of hole you require.
- 3
-
- Place cartridge into a skeleton gun and seat the plunger by pressing the trigger.
- 4
-
- Squeeze the trigger to force out the filler and move the gun along the repair.
- 5
-
- The filler may be smoothed with a wet rounded spatula or dowl.
- 6
-
- Wipe off excess before it dries.
- 7
-
- Can be over painted when dry.
- 8
-
- Replace cap and wash tools in warm water.
- 9
-
- For best results the area to be filled should be no more than 20mm wide by 12mm deep.
- 10
-
Questions?
Call us0333 222 7171
(on working days between 08:15 and 16:45)